DIY Labyrinth Carbon Fiber Kit - Small

Price
$299.95
In stock! Usually ships within 24 hours.

Perfect for making your own Labyrinth-patterned composite parts like flares, interior pieces, or gas doors. Lightweight and eye-catching! Kit contains:

  • Carbon Fiber Fabric
    • Fibre Glast Labyrinth Pattern 3K 6 oz/sq yd, 3 yards by 50 inches roll
  • Epoxy Resin and Hardener
    • Fibre Glast 2000 Laminating Epoxy Resin, 1 quart can
    • Fibre Glast 2020 Epoxy Cure, ½ pint can
  • Release Agents
    • Partall Paste #2, 24 ounce tin
    • Fiber Glast 13 PVA Release Film, 1 quart bottle
  • Mixing and Layup Supplies
    • Fibre Glast Quart Mixing Set (1-pint paper mixing tubs, 5 qty; 9-ounce plastic graduated measuring cup; 4-ounce plastic cup with lid; 1-ounce plastic cup; teaspoon/tablespoon measuring spoon; 6-inch wooden mixing sticks, 5 qty; latex gloves, 5 pairs)
    • Fibre Glast Quart Starter Kit (plastic roller with wire handle, ½-inch diameter x 3-inch wide; 1-inch brushes, 2 qty; 1-½-inch brushes, 2 qty; squeegees, 2 qty; latex gloves, 4 pairs)

    See what people are making

    Brent Shanahan

    YouTube: B Gruppe

    "I was wanting to try working with carbon for a long time now and this finally got me to do it. Now there's no going back. The whole car will be carbon like your 240 before I know it! "

    Brent Shanahan

    YouTube: B Gruppe

    "I was wanting to try working with carbon for a long time now and this finally got me to do it. Now there's no going back. The whole car will be carbon like your 240 before I know it! "

    Willem Drees

    Instagram: @illwillem

    "Made some parts for me Lexus ISF time attack car. Anywhere i can save weight on this pig is big. Had an off and cracked up the front end so instead of buying new OEM part$ i decided to just splash what i could in carbon along with repairs i needed.  Made some headlight blanks, upper grill, radio block off to go with some other weight reduction. "

    Willem Drees

    Instagram: @illwillem

    "Made some parts for me Lexus ISF time attack car. Anywhere i can save weight on this pig is big. Had an off and cracked up the front end so instead of buying new OEM part$ i decided to just splash what i could in carbon along with repairs i needed.  Made some headlight blanks, upper grill, radio block off to go with some other weight reduction. "

    Willem Drees

    Instagram: @illwillem

    "Made some parts for me Lexus ISF time attack car. Anywhere i can save weight on this pig is big. Had an off and cracked up the front end so instead of buying new OEM part$ i decided to just splash what i could in carbon along with repairs i needed.  Made some headlight blanks, upper grill, radio block off to go with some other weight reduction. "

    Willem Drees

    Instagram: @illwillem

    "Made some parts for me Lexus ISF time attack car. Anywhere i can save weight on this pig is big. Had an off and cracked up the front end so instead of buying new OEM part$ i decided to just splash what i could in carbon along with repairs i needed.  Made some headlight blanks, upper grill, radio block off to go with some other weight reduction. "

    Griffin DuBrule

    YouTube: Modusha

    "hope you enjoy the journey that I've been on with my custom piece to mount a mk4 supra spoiler onto a BRZ, your contest pushed me to pull my first ever part!"

    Griffin DuBrule

    YouTube: Modusha

    "hope you enjoy the journey that I've been on with my custom piece to mount a mk4 supra spoiler onto a BRZ, your contest pushed me to pull my first ever part!"

    Steven Swartzentruber

    "I really liked the kit, very complete and good quality, was easy to work with and a great place to start. I'll definitely be a long term customer of Fibre Glast!!"

    Steven Swartzentruber

    "I really liked the kit, very complete and good quality, was easy to work with and a great place to start. I'll definitely be a long term customer of Fibre Glast!!"

    Steven Swartzentruber

    "Its a 1977 Yamaha xs750, the "hood" piece or headlight bezel is complete carbon, 4 layers. It is a complete custom piece, I started with cardboard, paper mache, fiberglass, then bondo to make my plug on which I wet layed the carbon over top. It was popped off, then cleared. The tank and tail piece are just overlayed with one layer of fabric. The "taillight cover" is 4 layers of full carbon though."

    Do you want to make your own custom carbon fiber parts?

    Our starter kit gives you the materials you need to do your own layup whether you want to skin an existing part or make new strong and lightweight carbon fiber pieces patterned from your own mold or part.

    High Quality Materials

    Our kit materials were selected by working closely with our supplier, Fiber Glast, to give DIYers the best possible results.

    The included system 2000 Epoxy Resin is ideal for learning how to layup composite pieces. It’s a medium viscosity, light amber laminating resin that provides fantastic strength and sanding characteristics for a room temperature epoxy.

    DON'T GET STUCK

    The Partall mold release wax and PVA film included in our kits work together to make sure your part doesn't get locked into your mold.

    The wax provides a durable, high gloss surface on your mold and the PVA film is water soluble for easy cleanup.

    DIY Kit How-to video

    Watch Tim explain how to use our large DIY kit as he makes a carbon hood for Xavier's S2000

    You may also like